Aerospace Systems Overview
Presenter: Dr Michael Gregg - USAF AFRL

RQV Introduction
Presenter: Mr Michael Zeigler - USAF AFRL

RQV Capability Area: Autonomous Collaborative Platforms
Presenter: Dr Douglas Meador - USAF AFRL/RQVI

Shaping Cost-Effective Unmanned Combat Aerial Vehicle Swarms
Presenter: Dr Robert Love - General Atomics Aeronautical Systems

Navigating Challenges with Increasing UAS Numbers and Capabilities
Presenter: Mr Tom Barnett - Kratos Defense

Manufacturing Technology for Aircraft Structures
Presenter: Dr Jonathan Miller - USAF AFRL/RXM

RQV Capability Area: Next-Generation Mobility
Presenter: Mr Ryan Plumley - USAF AFRL/RQVA

HSVTOL - An Enduring Need
Presenter: Mr Leighton Anderson - Bell Textron

Naval Air Vehicle S&T Investment Goals and Strategy
Presenter: Mr Steven Donaldson - NAVAIR SYSCOM

NG Low Cost Attritable Aircraft Platform Study (LCAAPS) Phase 1 – a Different Approach
Presenter: Mr Tod Palm - Northrop Grumman Corp

RQV Capability Area: Next Generation Systems
Presenter: Mr Douglas Szczublewski - USAF AFRL

Redefining Simulation and Design in the Age of AI: Fact or Fiction?
Presenter: Dr Karen Willcox - The University of Texas at Austin

Redefining Possible in the Air Domain
Presenter: Dr Michael Leahy - DARPA/APO

Design for Speed: Transforming Vehicle Engineering Methods to Meet 21st Century Security Needs
Presenter: Dr Linda Stancin - Lockheed Martin

Methodologies to Accelerate Operational Capability Fielding
Presenter: Mr Jerad Hayes - Boeing Co

Digital Engineering for Future Platforms
Presenter: Dr Steven Burd - Pratt & Whitney

NASA Aerosciences Evaluation and Test Capabilities (AETC) Portfolio Office Update
Presenter: Mr Stephen Helland - NASA GRC

DoD AEDC/AFRL Facility Update
Presenter: Mr Scott Meredith - AEDC

NPAT Wind Tunnel Characterization Working Group Activities
Presenter: Mr Earnest Arrington - HX5 Sierra at NASA Glenn

Quantifying Utility of Aerospace Derivatives: Multi-Fidelity Aero-Propulsion Optimization
Presenter: Mr Matthew Johnson - Northrop Grumman Corp

Aeroelastic and Aerothermoelastic Design Optimization using a Coupled Adjoint Method
Presenter: Dr Nathan Wukie - USAF AFRL

Manufacturability Considerations in MADO and Conceptual Design
Presenter: Mr Nathan Quay - Lockheed Martin Co

Propulsion Flowpath Integration for an Unmanned Fighter Using a Business Jet Engine
Presenter: Mr Morgan Funderburk - Blue Force Technologies

Rapid Propulsion Development Approach for UAVs using Commercial Engines
Presenter: Dr Howard Lee - General Atomics Aeronautical Systems Inc

Breathing Life into Unmanned Aerial Systems: Aeropropulsion Integration for Rapid Development
Presenter: Mr Tom Barnett - Kratos Defense

CANCELLED Compliant Structure Optimization of Morphing Control Surfaces
Awaiting Confirmation

Topology Optimized Structural Configurations using Physics Informed Methods
Presenter: Mr Matthew Leonard - USAF AFRL

Going beyond component printing: How AM enables the full digital manufacturing thread for Unmanned Aerial Systems (UAS)
Presenter: Mr Daniel Fournier - General Atomics - ASI

NPAT National Force Measurement Working Group Activities
Presenter: Mr Jonathon Ponder - NASA

Large Scale Air Calibration Lab in 16S
Presenter: Mr Nathan Payne - USAF

Data Quality/Data Uncertainty
Presenter: Ms Erin Hubbard - NASA Glenn Research Ctr

Real Time Data Visualization system in AFRL's Trisonic Gas-Dynamics Facility (TGF)
Presenter: Mr Paul Smith - USAF AFRL

Methods for Stress-based Structural Conceptual Design in a MADO Framework
Presenter: Dr Daniel Woods - USAF AFRL/RQVS

Aerodynamic Optimization using Multi-Fidelity CFD Analysis
Presenter: Mr David Weston - USAF AFRL/RQVA

Collaborative Design via the Engineering Sketch Pad
Presenter: Dr John Dannenhoffer - Syracuse University

Rapid CFD for Conceptual Design
Presenter: Mr Rick Hooker - Helden

Inlet Design and Integration for the X-61A Gremlins Air Vehicle: Approach and Lessons Learned
Presenter: Dr Katie Blackmar - Dynetics a wholly owned subsidiary of Leidos

An Engine Perspective on Inlet Compatibility
Presenter: Mr David Drye - USAF

Beyond the Ground: Inlet Compatibility Best Practices for Successful First Flights
Presenter: Dr Brian Binkley - USAF

Flight Test Best Practices for Propulsion Integration Testing
Presenter: Mr Eric Hansen - USAF

Topology Optimized Wing Frame and Fuselage Design
Presenter: Dr James Joo - USAF AFRL

Non-Traditional Composite Layup Design and Testing
Presenter: Ms Savannah Crampton - USAF AFRL/RQVS


Authors: Maj John Brewer - USAF AFIT, Dr James Joo - USAF AFRL

Scalable Composites Robotic Additive Manufacturing (SCRAM)
Presenter: Mr David Ivankovich - Northrop Grumman Corp

Utility of Robotic Sheet Metal Forming Technology in Manufacturing of Affordable Aerospace Structures
Presenter: Dr Babak Raeisinia - Machina Labs Inc

DARPA CRANE - What It Means for Flow Control
Presenter: Dr Richard Wlezien - DARPA TTO

Overview of the CRANE X-Plane Test Capabilities and the Modular AFC Augmented Wing Testbed
Presenter: Dr Kevin Uleck - Aurora Flight Sciences

Lockheed Martin Perspectives on AFC: Lessons Learned and a Path Forward Toward Adoption
Presenter: Mr Guy Montoro - Lockheed Martin

Flow Control Technologies & Design Methodologies in the Georgia Tech CRANE Program
Presenter: Dr Jimmy Tai - Georgia Institute of Technology

REACT Overview
Presenters:
Mr Jason Kao - USAF


Mr Jason Kao - USAF


Mr Jason Kao - USAF

Overview of AFRL/GA-ASI LCAAPS
Presenter: Mr Christopher Poole - General Atomics ASI

MADO for LCAAT Off-Board Active Sensor Station
Presenter: Dr Dean Bryson - USAF AFRL

Expanded MDO for Effectiveness-based Design Technologies (EXPEDITE) Program Overview
Presenter: Dr Michael Buonanno - Lockheed Martin Co

Fail-Safe Technologies for Bonded Unitized Composite Structures (FASTBUCS)
Presenter: Dr Stephen Clay - USAF AFRL/RQVS

The Effects of Digital Transformation on Air Vehicle Structural Certification
Presenter: Dr Brian Justusson - The Boeing Co

Overview of Modeling for Affordable Sustainable Composites (MASC)
Presenter: Dr Waruna Seneviratne - National Institute for Aviation Research NIARWSU

Organic Matrix Composites Process-to-Performance Evaluation Research and Analysis (OPPERA)
Presenter: Dr David Mollenhauer - USAF AFRL/RXNP

Ground Vibration Testing on Experimental eVTOL
Presenter: Ms Melissa Hall - USAF AFRL/RQVV

F/A-18 Strain Gage Loads Calibration Test
Presenter: Mr Tony Chen - NASA

Flutter Airworthiness Clearance Effort for a New Wing Store on F-15B/D
Presenter: Ms Natalie Spivey - NASA AFRC

Limit Cycle Oscillation - Testing and Training of the Thin-Winged F-16
Presenter: Mr Daniel Ramos - USAF


Author: Ms Minjung Kang - USAF

Selecting the Right AFC for Your Application
Presenter: Dr Rene Woszidlo - The Boeing Co

Thoughts on AFC Applications, Ongoing Work and Future Physics-Based Modeling
Presenter: Dr Aaron Altman - USAF AFRL/RQVA

Gemini Overview
Presenter: Dr Christopher Lupp - USAF AFRL/RQVC

Mission-Focused Uncertainty Quantification Applied to Industrial Aircraft Design
Presenter: Dr Jacob Haderlie - Northrop Grumman


Author: Mr Kentaro Sugiyama - Northrop Grumman Corp

Effectiveness- The Metric That Matters
Presenter: Mr William Beglin - University of Dayton Reseach Institute

Technology Development for Hi-Rate Composite Aircraft Manufacturing (HiCAM)
Presenter: Dr Richard Young - NASA

The Technical Cooperation Program (TTCP) Composite Blind Analysis Challenge
Presenter: Dr Karen DeMille - USAF

Validation of Laser Bond Inspection (LBI)
Presenter: Dr Steven Brady - The Boeing Co

Structural Validation testing for X-57 Airworthiness
Presenter: Mr Wesley Li - NASA

Additively Manufactured Hypersonic Inlet Cowl Test
Presenter: Mr Michael Kurtz - GoHypersonic Inc

Transition from High Temperature Lab sensor to Hypersonic Flight Test Vehicle
Presenter: Mr William Boles - USAF AFRL/RQVV

Printed Composites for Attritables and Rapid Deployables (PiCARD)
Presenter: Dr Dennis Butcher - USAF AFRL

Autonomous Collaborative Platforms – An Overview of Needs and Manufacturing Technologies
Presenter: Mr Craig Neslen - USAF AFRL

Design for Manufacture of Attritable Aircraft Primary Structure (DMAAPS) - Braided Wing
Presenter: Mr Thomas Margraf - Spintech Holdings Inc

Digital Mission Engineering for APPI
Presenter: Mr Cale Zeune - USAF AFRL/RQVA

MBSE Approach towards Rapid Design of Power & Thermal Subsystems for APPI
Presenter: Dr Soumya Patnaik - USAF AFRL/RQQI

APPI RQV Perspective
Presenter: Dr Joshua Deaton - USAF AFRL

APPI RQT Perspective
Presenter: Dr Michael List - USAF AFRL/RQTT

LCMC/MBSE Requirements and Acquisition
Presenter: Mr David Drye - AFLCMC

Separation of Miniaturized Munitions - Project Overview
Presenter: Mr Rudy Johnson - USAF AFRL/RQVI

Dynamic Balance Design/Results
Presenter: Mr Ian Maatz - USAF AFRL/RQVI

Advancements in Modeling Unsteady Store Separation
Presenter: Dr Nicholas De Lucca - MZA Associates

Aeroelastic Scaling of 3D Printed Models
Presenter: Dr Robert Taylor - University of Texas at Arlington

Dynamic Aeoroelastic Testing of 3D Printed Wind Tunnel Models
Presenter: Dr Alexander Pankonien - USAF AFRL

Advanced Rapid Prototyping
Presenter: Mr Peter Buzzard - Blue Force Technologies


Author: Mr Peter Buzzard - Blue Force Technologies

Low Cost Agile Manufacturing of UAV Structure – Applications for Platform Sharing
Presenter: Mr Jon Amback - General Atomics - ASI

Low Cost Agile Manufacturing of UAV Structure – An Approach with Platform Sharing
Presenter: Mr Joshua Dempsey - Kratos Defense

Low Cost Agile Manufacturing of UAV Structure – An Approach with Platform Sharing
Presenter: Mr Jonathan BartleyCho - Northrop Grumman Corp

Model Based... Everything?!: Project Sirius - Exploring Digital Engineering in the early phases of design with the goal of accelerating validation and certification
Presenter: Mr Edward Scholl - Lockheed Martin

Lessons Learned in Deploying MBSE at Scale
Presenter: Ms Alyssa Niquette - Pratt & Whitney

Hybrid Integrated Propulsion-PTMS Exploration with Advanced Aircraft Architectures utilizing MDAO
Presenter: Mr Matthew DeFore - Northrop Grumman Aeronautics Systems

CANCELLED Integrated Risk Reduction Benefits of Hybrid Electric Propulsion for EMD Programs
Awaiting Confirmation

Exploration of Machine Learning Methods Using a Small Store CFD Database
Presenter: Dr Peter Cavallo - CRAFT Tech

Dynamic Response of Cavity Door Operation at Supersonic Speeds
Presenter: Dr Rajan Kumar - Florida State University

Supersonic Envelope Expansion of the GBU-31 Separating from the F-35
Presenter: Mr Christopher Lipford - USAF

OBWS Weapons Integration - Vision
Presenter: Dr Michael Stanek - USAF AFRL/RQVI

Past and Future Tests of the Aurora DARPA CRANE AFC System and Aircraft
Presenter: Mr Alexander Feldstein - Aurora Flight Sciences

Design and Flight Testing of Boeing's Little Horned Owl
Presenter: Mr James Guglielmo - The Boeing Co

Morphing Missile Design and Sled Testing
Presenter: Dr Richard Beblo - USAF AFRL/RQVC

CANCELLED Flight Testing of Northrop Grumman's Great Horned Owl and Little Horned Owl
Awaiting Confirmation