Residual Stresses and their Applications in Sustainment of Aircraft Structures Instructor: Mr Sam Kantimathi - Fatigue Concepts
8:00 AM - 12:00 PM
Training Successful Engineers: Developing Engineers for the Sustainment Enterprise Instructors: Mr Dave Gaddis - L-3 Communications Mr Russell Davis - L-3 Communications Ms Maurissa D'Angelo - D'Angelo Technologies LLC Author: Mr Joseph D'Angelo - D'Angelo Technologies, LLC
10:00 AM - 12:00 PM
Verification and Validation Best Practices for Integrated Computational Materials Engineering Instructor: Dr Mark Benedict - USAF AFRL Authors: Dr Mark Benedict - USAF AFRL, Mr David Riha - SwRI
1:00 PM to 5:00 PM Monday, April 14, 2014
Training II
1:00 PM - 5:00 PM
Introduction to Probabilistic Analysis and Design Instructor: Mr David Riha - SwRI
1:00 PM - 5:00 PM
Residual Stresses and their Applications in Sustainment of Aircraft Structures (Repeat)
Tuesday, April 15, 2014
7:45 AM to 9:30 AM Tuesday, April 15, 2014
General Session
7:45 AM - 8:00 AM
Welcome Remarks
8:00 AM - 9:30 AM
Airworthiness Keystone Panel Moderator: Ms Dawn McGarvey-Buchwalder - USAF Panel Members: Mr Jorge Gonzalez - USAF TAA Mr Robert Hanley - NAVAIR SYSCOM Mr Samuel Cregger - The Boeing Co Mr Joel Ligon - FAA Mr Don Roberts - Lockheed Martin Aeronautics Co
10:00 AM to 12:00 PM Tuesday, April 15, 2014
General Session
10:00 AM - 12:00 PM
Corrosion Keystone Panel Panel Members: Dr David Robertson - USAF SAF/AQR Mr Richard Russell - NASA KSC Mr Russell Alford - USAF Mr Terry Chambers - Lockheed Martin Mr James Suzel - S&K Technologies LLC
1:30 PM to 3:00 PM Concurrent Sessions Tuesday, April 15, 2014
Airworthiness
Session Chair: Mr Keith McIver - The Boeing Co (Invited)
1:30 PM - 2:00 PM
USAF AW Process Update Presenter: Ms Dawn McGarvey Buchwalder - USAF
2:00 PM - 2:30 PM
Airworthiness and Sustainment in Australia's Fleets - Challenges and Lessons Learned Presenter: Mr Richard Gauntlett - AA&S Australia
2:30 PM - 3:00 PM
USAF Airworthiness Process for Foreign Military Sales (FMS) & Direct Commercial Sales (DCS) Presenter: Ms Dawn McGarvey Buchwalder - USAF
1:30 PM to 3:00 PM Concurrent Sessions Tuesday, April 15, 2014
Corrosion - Coatings and NDI
Session Chair: Dr William Winfree - NASA LaRC
1:30 PM - 2:00 PM
Future Directions for Nondestructive Corrosion Detection, Characterization, and Environmental Sensing Research and Development in AFRL Presenter: Dr Eric Lindgren - USAF AFRL Authors: Mr John Brausch - USAF AFRL, Mr Charles Buynak - USAF AFRL/RX
2:00 PM - 2:30 PM
Development of Improved Accelerated Corrosion Qualification Test Methodology for Aerospace Materials Presenter: Dr Chad Hunter - USAF AFRL
2:30 PM - 3:00 PM
Multi-Scale Modeling of Corrosion-Fatigue in AA 7XXX Alloys at the Material Microstructural Level Presenter: Dr Robert Tryon - VEXTEC Corp Authors: Dr Animesh Dey - VEXTEC, Mr Ganapathi Krishnan - VEXTEC
1:30 PM to 3:00 PM Concurrent Sessions Tuesday, April 15, 2014
Digital Twin
Session Chair: Dr Jeong-Beom Ihn - Boeing Research & Technology
1:30 PM - 2:00 PM
Activities of the Airframe Digital Twin Working Group Presenter: Dr Eric Tuegel - USAF AFRL
2:00 PM - 2:30 PM
Integrated Structural Health Monitoring and Management of In-Flight Damaged Aircraft Structure Presenter: Dr Banavara Seshadri - National Institute of Aerospace Authors: Mr Thiagarajan Krishnamurthy - NASA LaRC, Mr Richard Ross - NASA LaRC
2:30 PM - 3:00 PM
Turbine Probabilistic Algorithms Leveraged for Digital Twin Presenter: Dr Liping Wang - GE Author: Dr Genghis Khan - General Electric Global Research
3:30 PM to 5:30 PM Concurrent Sessions Tuesday, April 15, 2014
Corrosion - Aircraft Systems
Session Chairs: Dr Joseph Gallagher - Consultant and Mr James Suzel - S&K Technologies LLC
3:30 PM - 4:00 PM
Corrosion Impacts to the F-16 ASIP Presenter: Dr Kimberli Jones - USAF Author: Mr Bryce Harris - USAF
4:00 PM - 4:30 PM
F-15 Teardown Data & Corrosion Plan Development Presenter: Mr Scott Osburn - S&K Technologies LLC Author: Mr Lucas Garza - AFLCMCWWQEC
4:30 PM - 5:00 PM
Impact of Corrosion on Military Transport Aircraft Fleets Presenter: Mr Russell Alford - USAF
5:00 PM - 5:30 PM
The History of Orbiter Corrosion Control (1981 - 2011) Presenter: Mr Richard Russell - NASA KSC
3:30 PM to 5:30 PM Concurrent Sessions Tuesday, April 15, 2014
Digital Thread
Session Chair: Mr Keith McIver - The Boeing Co (Invited)
3:30 PM - 4:00 PM
Uncertainty Propagation in Multi-Disciplinary Computational Analysis Presenter: Dr Animesh Dey - VEXTEC Authors: Mr Ganapathi Krishnan - VEXTEC, Dr Robert Tryon - VEXTEC
4:00 PM - 4:30 PM
An Integrated Approach to Manage the Impact of Bulk Residual Stress on the Design-Build-Sustain Process for Primary Aircraft Structure Presenter: Dr Mark James - Alcoa Technical Ctr Authors: Dr Dale Ball - Lockheed Martin Co, Dr Robert Bucci - Alcoa Inc, Mr Dustin Bush - Alcoa Wheel & Forged Products, Mr David Selfridge - Alcoa Forgings & Extrusions, Dr John Watton - Alcoa Technical Ctr
4:30 PM - 5:00 PM
Digital Thread Compatible Autonomous Hole Depth Measurement System Presenters: Mr Jesse McDaniel - Systems & Materials Research Corp SMRC Dr Malcolm Prouty - Systems & Materials Research Corp Authors: Mr Max Burtner - Systems & Materials Research Corp SMRC, Mr Christopher Ingham - Systems & Materials Research Corp, Dr Malcolm Prouty - Systems & Materials Research Corp, Mrs Keris Ward - Systems & Materials Research Corp SMRC
5:00 PM - 5:30 PM
An Innovative Low Maintenance Data Acquisition Solution for Load Factor Capture Presenter: Mr Niall McGirr - CurtissWright
3:30 PM to 5:30 PM Concurrent Sessions Tuesday, April 15, 2014
Structures - Bonded Technologies
Session Chairs: Mr Marc Piehl - The Boeing Co and Mr Mark Freisthler - FAA (Invited)
3:30 PM - 4:00 PM
Test of Adhesively Bonded Repairs to Fuselage Structure Subjected to Environmental Conditions Presenter: Mr Bin Lei - Drexel University
4:00 PM - 4:30 PM
On the Durability of Composite-Adhesive Bonds: Is Moisture the Enemy? Presenter: Mr John Osborne - The Boeing Co Authors: Dr Marcus Tony Belcher - The Boeing Co, Dr Kay Blohowiak - The Boeing Co, Mr Marc Piehl - The Boeing Co
4:30 PM - 5:00 PM
Experimental Study on Retarding Fatigue Crack Growth Rate in an Aluminum Fuselage Panel Using Boron/Epoxy Patches Presenter: Mr Reewanshu Chadha - Drexel University Authors: Dr Jonathan Awerbuch - Drexel University, Dr John Bakuckas - FAA, Dr TeinMin Tan - Drexel University
Wednesday, April 16, 2014
8:00 AM to 9:30 AM Wednesday, April 16, 2014
General Session
8:00 AM - 9:30 AM
NDI Keystone Panel Panel Members: Mr Charles Buynak - USAF AFRL/RX Mr David Campbell - AFSC/ENS Dr Donald Palmer - The Boeing Co Dr William Winfree - NASA LaRC
10:00 AM to 12:00 PM Wednesday, April 16, 2014
General Session
10:00 AM - 12:00 PM
Depot & MRO Operations Keystone Panel Moderator: Dr Vincent Russo - UTC Consultant Panel Members: Ms Angie Tymofichuk - USAF Dr Marilyn Gaska - Lockheed Martin Mr Bud Westerman - The Boeing Co Mr Dave Gaddis - L-3 Communications
1:30 PM to 3:00 PM Concurrent Sessions Wednesday, April 16, 2014
Aviation Safety - Sustainment: Past, Present and Future
Session Chair: Mr Robert McGuire - FAA
1:30 PM - 2:00 PM
A Strategy for Implementing Continued Airworthiness Inspections on Classic Single Engine Airplanes Presenter: Ms Beth Gamble - Cessna Aircraft
2:00 PM - 3:00 PM
Old Lessons for New Audiences Presenter: Mr Marvin Nuss - NuSS Sustainment Solutions
1:30 PM to 3:00 PM Concurrent Sessions Wednesday, April 16, 2014
Session Chairs: Mr Bud Westerman - The Boeing Co and Mr Richard Gauntlett - AA&S Australia
1:30 PM - 2:00 PM
Air Force Sustainment Center Complex of the Future (CoF) Presenter: Mr Edward Ayer - Air Force Sustainment Ctr
2:00 PM - 2:30 PM
Air Force Research Laboratory Sustainment Science and Technology Strategy Presenter: Mr Joseph Baker - USAF AFRL/RXT
2:30 PM - 3:00 PM
Building on Air Force Processes for Successful Transition Presenter: Mr Stephan Wolanczyk - USAF AFRL Author: Dr Merrill Minges - Universal Technology Corp
1:30 PM to 3:00 PM Concurrent Sessions Wednesday, April 16, 2014
NDI - NDE Automation and General Aviation NDI
Session Chair: Mr Elliott Cramer - NASA LaRC
1:30 PM - 2:00 PM
The State of Nondestructive Testing (NDT) in General Aviation Presenter: Mr Timothy Kinsella - Dassault Falcon Jet
2:00 PM - 2:30 PM
Automated Robotic Crawler for In-Service NDE of Aircraft Structure Presenter: Mr Karl Nelson - The Boeing Co
2:30 PM - 3:00 PM
Scalable Multi-Technique NDE Scanners for Space Launch Systems Presenter: Mr Eric Burke - NASA LaRC
3:30 PM to 5:30 PM Concurrent Sessions Wednesday, April 16, 2014
Depot Modernization - Depot Engineering Training & Tools
Session Chair: Mr Don Roberts - LM Aeronautics
3:30 PM - 4:00 PM
Integrating Engineers Into the PDM Enterprise Presenter: Mr Dave Gaddis - L-3 Communications
4:00 PM - 4:30 PM
The Making of a Sustainment Engineer Presenter: Mr Russell Davis - L-3 Communications
4:30 PM - 5:00 PM
Extended 1553 - Standardized and Certified for Airworthiness: Approach to Affordable Sustainment and Modernization Presenter: Mr Greg Fielding - Edgewater Computer Systems Inc
5:00 PM - 5:30 PM
The Depot of the Future and Advanced Diagnostic Capability Presenter: Mr Ken Anderson - Universal Synaptics
3:30 PM to 5:30 PM Concurrent Sessions Wednesday, April 16, 2014
NDI - Electromagnetic Sensing
Session Chairs: Mr Karl Nelson - The Boeing Co and Mr Daniel Perey - NASA LaRC
3:30 PM - 4:00 PM
Eddy Current Method for Evaluating Residual Stressed Cold Worked Rivet Holes Presenter: Mr Stephen Galbraith - Resodyn Corp
4:00 PM - 4:30 PM
NDE Development for Aging Aerospace Polymer Materials Presenter: Dr Donald Palmer - The Boeing Co
4:30 PM - 5:00 PM
Advanced Magneto-Optical Imaging System for Crack Inspections Presenter: Dr Giovanni Nino - Quest Integrated Inc Qi2
5:00 PM - 5:30 PM
Validation of Eddy Current Based Sensor Technologies for the Inspection of Fastener Site Fatigue Cracking in Multi-Layer Metallic Structures Presenter: Mr David Forsyth - TRI/Austin
3:30 PM to 5:30 PM Concurrent Sessions Wednesday, April 16, 2014
Structures - Residual Stresses
Session Chairs: Dr John Bakuckas - FAA and Mr Tod Palm - Northrop Grumman Corp
3:30 PM - 4:00 PM
Laser Peening for Improved Fatigue Strength and Lifetime for a Wing Attachment Shear-Tie Presenters: Ms Tracy Racanelli - Metal Improvement Co Surface Technologies (Curtiss-Wright) Dr Thomas Mills - APES Inc
4:00 PM - 4:30 PM
Residual Stresses from Cold Working of Aircraft Fastener Holes Presenter: Dr Adrian DeWald - Hill Engineering LLC Authors: Mr Dallen Andrew - USAF, Mr Scott Carlson - Southwest Research Institute, Prof Michael Hill - Hill Engineering LLC, Mr David Marosok - Northrop Grumman Technical Services, Mr Robert Pilarczyk - Hill Engineering LLC, Dr Mark Thomsen - USAF
4:30 PM - 5:00 PM
Ultrasonic Shot Peening for Commercial and Military Depot Level Repairs Presenter: Ms Kelly McClurg - Avion Solutions Inc Authors: Mr Randy Buckner - Avion Solutions Inc, Ms Kelly McClurg - Avion Solutions Inc
5:00 PM - 5:30 PM
Important Parameters for Modeling Fatigue Failure at Cold Worked Fastener Holes Presenter: Dr Thomas Mills - APES Inc Authors: Mr Joshua Hodges - USAF, Mr Robert Pilarczyk - Hill Engineering LLC, Dr Scott ProstDomasky - APES Inc
Thursday, April 17, 2014
8:00 AM to 9:30 AM Concurrent Sessions Thursday, April 17, 2014
Corrosion - 3D Models and Materials
Session Chair: Dr Kimberli Jones - USAF
8:00 AM - 8:30 AM
Non-Chrome OML System Transition Effort Presenter: Dr Walter Juzukonis - USAF AFRL Author: Mr Michael Spicer - USAF AFRL
8:30 AM - 9:00 AM
A Multifunctional Smart Coating for Autonomous Corrosion Control Presenter: Mr Richard Russell - NASA KSC
9:00 AM - 9:30 AM
Avionics Corrosion Presenter: Mr David Johnson - USAF AFRL/RXSA
8:00 AM to 9:30 AM Concurrent Sessions Thursday, April 17, 2014
International Perspectives
Session Chair: Mr Keith McIver - The Boeing Co (Invited)
8:00 AM - 8:30 AM
The Usage of Thermal Regions As A Air Navigation Rule For Unmanned Aircraft Systems Presenter: Lt Resul Fikir - Turkish Air Force Academy
8:30 AM - 9:00 AM
Common Cause Analysis in the Safety Assessment of Interconnection Systems Presenter: Mr Simon Taylor - Fokker Elmo BV
8:00 AM to 9:30 AM Concurrent Sessions Thursday, April 17, 2014
Materials - NonMetallic
Session Chairs: Mr Curtis Davies - FAA and Dr Waruna Seneviratne - Wichita State University NIAR
8:00 AM - 8:30 AM
Multifunctional Materials for Autonomous UAV Systems Presenter: Dr FuKuo Chang - Stanford University
8:30 AM - 9:00 AM
An Efficient Model for Assessment of Damage Containment in a Notched PRSEUS Fuselage Panel Subjected to Combined Loads Presenter: Mr Andrew Bergan - Drexel University Authors: Dr Jonathan Awerbuch - Drexel University, Dr Carlos Davila - NASA LaRC, Dr Frank Leone - NASA LaRC, Dr TeinMin Tan - Drexel University
9:00 AM - 9:30 AM
Strength and Fatigue Prognosis Perspective in Composites Presenter: Prof Andrew Makeev - The University Of Texas At Arlington
8:00 AM to 9:30 AM Concurrent Sessions Thursday, April 17, 2014
NDI - Emerging Digital NDE
Session Chairs: Mr Karl Nelson - The Boeing Co and Mr David Westlund - FAA
8:00 AM - 8:30 AM
Near-Infrared Machine Vision and NDE for Additive Manufacturing Presenter: Mr Eric Burke - NASA LaRC
8:30 AM - 9:00 AM
Automated Ultrasonic Grain Size Measurement in Nickel Alloy Engine Disks Presenter: Dr Paul Panetta - Applied Research Associates
9:00 AM - 9:30 AM
Development and Validation of Automated Interpretation of Ultrasonic NDT Presenter: Mr David Forsyth - TRI/Austin
10:00 AM to 12:00 PM Concurrent Sessions Thursday, April 17, 2014
CBM/IVHM - CBM Usage
Session Chair: Mr Paul Swindell - FAA
10:00 AM - 10:30 AM
The A400M Usage Monitoring Function Presenter: Mr Alexis Falga - Airbus SAS Authors: Dr Alain Santgerma - Airbus SAS, Dr JeanPascal Kleinermann - Airbus SAS, Mr Alexis Falga - Airbus SAS
10:30 AM - 11:00 AM
Probabilistic Virtual Inspection for Condition Based Maintenance Presenter: Dr Animesh Dey - VEXTEC Authors: Mr Ganapathi Krishnan - VEXTEC, Dr Robert Tryon - VEXTEC
11:00 AM - 11:30 AM
A Structural Health Monitoring Methodology Based on the Combination of In-Flight and Simulated Data: A Practical Application in Helicopter Components Presenter: Mr Gustavo Dias - Critical Materials SA Authors: Mr Paulo Antunes - Critical Materials, Maj Teresa Cabral - Portuguese Air Force, Capt Daniel Coutinho - Portuguese Air Force, Mr Gustavo Dias - Critical Materials SA, Maj Delfim Dores - Portuguese Air Force, Capt Diogo Duarte - Portuguese Air Force, Mr Filipe Passarinho - CEIIA, Mr Julio Viana - Critical Materials SA, Miss Elisabeth 0' Brien - CurtissWright Avionics, Lt Jose Cardoso - Portuguese Air Force, Maj Joao Simoes - Portuguese Air Force
11:30 AM - 12:00 PM
Quantification of Fatigue Crack Damage Detection Using Structural Health Monitoring Technique Presenter: Dr Sang Jun Lee - Acellent Technologies Inc Authors: Dr Sang Jun Lee - Acellent Technologies Inc, Mr Surajit Roy - Stanford University, Dr Vishnuvardhan Janapati - Acellent Technologies Inc, Mr Franklin Li - Acellent Technologies Inc, Dr Amrita Kumar - Acellent Technologies Inc, Ms Irene Li - Acellent Technologies Inc
10:00 AM to 12:00 PM Concurrent Sessions Thursday, April 17, 2014
Fastener and Repair Systems
10:00 AM - 10:30 AM
Fighter Jet Wing Repair and Refurbishment Presenter: Mr Christopher Garville - Mere Aircraft Co Inc Author: Mr Christopher Garville - Christopher Overseas Corp
10:30 AM - 11:00 AM
New Generation Fastener Drive Systems and Advanced Material Coatings Presenter: Mr Ken Campitelli - Phillips Screw Co Authors: Mr Fredrick Laguines - Engineering Software System Solutions Inc ES3, Mr James Randolph - ES3, Mr Ken Campitelli - Phillips Screw Co
11:00 AM - 11:30 AM
Intelligent Sealant Application System (ISAS) Kaps Presenter: Mr Christopher Ingham - Systems & Materials Research Corp SMRC Author: Dr Malcolm Prouty - Systems & Materials Research Corp
11:30 AM - 12:00 PM
Development, Qualification, and Production of QwikSeal: Pre-Sealed Aerospace Fasteners for Use with Manual and Automated Fastening Systems Presenter: Dr Christopher Pavlos - Systems & Materials Research Corp SMRC Author: Dr Malcolm Prouty - Systems & Materials Research Corp
10:00 AM to 12:00 PM Concurrent Sessions Thursday, April 17, 2014
Materials - Metallic
Session Chair: Mr Richard Russell - NASA KSC
10:00 AM - 10:30 AM
Assesment of Aluminum Lithium for Primary Structure Presenter: Mr Kevin Stonaker - FAA William J Hughes Technical Center Author: Mr Kevin Stonaker - FAA
10:30 AM - 11:00 AM
Fractographic Examinations and Reconstruction of Fatigue Crack Growth in Aluminum Lithium Riveted Lap Joints Presenter: Mr Babak Anasori - Drexel University Authors: Dr Jonathan Awerbuch - Drexel University, Dr John Bakuckas - FAA, Mr Franklin Saillot - Drexel University, Mr David Stanley - Drexel University, Mr Kevin Stonaker - FAA William J Hughes Technical Ctr, Dr TeinMin Tan - Drexel University
11:00 AM - 11:30 AM
Aluminum Alloy Substitution for Modernizing the Aging Fleet Presenters: Mr Donald Shrader - Alcoa Defense Mr Frank Shoup - Alcoa Defense Authors: Capt Allison Dempsey - USAF, Mr Frank DiCocco - Alcoa Defense, Ms Stephanie Flanagan - USAF AFRL, Capt Marsha Karlan - USAF, Mr Miloslav Novak - Alcoa Inc
11:30 AM - 12:00 PM
Fatigue Crack Growth Rate Testing and Modeling of 7249-T76511 Aluminum Alloy Presenter: Mr Yan Bombardier - National Research Council Canada Author: Dr Min Liao - National Research Council Canada
10:00 AM to 12:00 PM Concurrent Sessions Thursday, April 17, 2014
Sustainment - Fleet Management Analysis & Repair
Session Chair: Mr Russell Keller - The Boeing Co
10:00 AM - 10:30 AM
C-17 Global Fleet Partnership - A Working Example of SMART Defence & Global Aviation Safety & Sustainment Partnerships Presenter: Mr Trevor Burke - NATO Support Agency
10:30 AM - 11:00 AM
Structural Analysis Tool for Aircraft Component Repair and Replacement - WAILAM Presenter: Dr Pawel Woelke - Weidlinger Associates Inc
11:00 AM - 11:30 AM
Cost Effective Structural Repair Solutions for Damaged and Discrepant Holes in Metals and Composites Presenter: Mr Len Reid - Fatigue Technology
11:30 AM - 12:00 PM
Rapid Airframe and Systems Repairs Presenter: Mr Mike Evans - Aerowing Author: Mr Michael Evans - Aerowing Inc
12:00 PM to 1:30 PM Thursday, April 17, 2014
Group Luncheon
12:00 PM - 12:30 PM
Luncheon Presentation Luncheon Speaker: Mr John Walker - The Padina Group
1:30 PM to 3:00 PM Concurrent Sessions Thursday, April 17, 2014
NDE - Composites NDE
1:30 PM - 2:00 PM
A Comparison of Inspection Methods for Assessing Composite Laminate Impact Damage in the Failure Threshold-to-Barely Visible Range Presenter: Mr Stephen Neidigk - Sandia National Labs
2:00 PM - 2:30 PM
Develop Portable Sonic Infrared Imaging Prototype for Wide Spread Impact Damage Assessment in Aircraft Composite Structures Presenter: Dr Xiaoyan Han - Wayne State University
2:30 PM - 3:00 PM
Alternative Configurations for On-Aircraft Thermography Presenter: Dr Steven Shepard - Thermal Wave Imaging Inc
1:30 PM to 3:00 PM Concurrent Sessions Thursday, April 17, 2014
Structures - Advance in Modeling
Session Chairs: Ms Melissa Shkerich - HBM nCode and Mr Reewanshu Chadha - FAA William J Hughes Technical Ctr
1:30 PM - 2:00 PM
Recent Developments and Challenges Implementing New and Improved Stress Intensity Factor (K) Solutions in NASGRO for Damage Tolerance Analyses Presenter: Mr Joseph Cardinal - SwRI Authors: Mr Joachim Beek - NASA JSC, Dr Yajun Guo - Jacobs JETS, Dr YiDer Lee - SwRI, Dr Robert McClung - SwRI
2:00 PM - 2:30 PM
Monte Carlo Based Quantitative Risk Assessment for Multiple Site Damage in Aircraft Structures Presenter: Dr Guillaume Renaud - National Research Council Canada Authors: Mr Yan Bombardier - National Research Council Canada, Dr Min Liao - National Research Council Canada
1:30 PM to 2:00 PM Concurrent Sessions Thursday, April 17, 2014
Supply Chain - Supply Chain Management
Session Chair: Dr Kevin Slattery - The Boeing Co
1:30 PM - 2:00 PM
Manufacturing Process Consistency in a Sustainment Spares Environment Presenter: Dr Mark Thomsen - USAF Authors: Mr Dallen Andrew - SwRI, Mr Robert Pilarczyk - Hill Engineering LLC, Mr George Rogers - USAF
2:00 PM - 2:30 PM
Hitting the Road to Achieve Bilateral communication with Suppliers Presenter: Mr Thomas Sanneman - BAE Systems
2:30 PM - 3:00 PM
Military Parts and Supply Cost Forecasting Service & Methodology Presenter: Mr Dan Lichtenstein - IHS Authors: Mr Richard Fullenbaum - IHS Global Inc, Mr Dan Lichtenstein - IHS Global Inc
3:30 PM to 5:00 PM Concurrent Sessions Thursday, April 17, 2014
Advanced NDI Techniques
Session Chairs: Dr William Winfree - NASA LaRC and Mr David Galella - FAA
3:30 PM - 4:00 PM
Adaptive Machining of Critical Aero Engine Components Presenter: Dr Drazen Veselovac - WZL RWTH Aachen University Author: Dr Drazen Veselovac - WZL RWTH Aachen University
4:00 PM - 4:30 PM
Microwave Coating Thickness Inspection for Aerospace Composite Structures Presenter: Mr Jesse McDaniel - Systems & Materials Research Corp SMRC Author: Dr Malcolm Prouty - Systems & Materials Research Corp
3:30 PM to 5:30 PM Concurrent Sessions Thursday, April 17, 2014
CBM/IVHM - Sensors
Session Chair: Dr Jeong-Beom Ihn - Boeing Research & Technology
3:30 PM - 4:00 PM
Wireless Sensors Activated by Structural Damage Presenter: Mr Robert Kauffman - University of Dayton Research Institute
4:00 PM - 4:30 PM
Flight Testing of Permanently Installed Eddy Current Sensors for IVHM Presenter: Mr Christopher Martin - JENTEK Sensors Inc Authors: Dr Neil Goldfine - JENTEK Sensors Inc, Ms Jennifer Marx - JENTEK Sensors, Mr Brian Manning - JENTEK Sensors Inc, Mr Christopher Root - NAVAIR, Dr Floyd Spencer - sfHire, Mr Adam Barrett - NAVAIR, Mr Cody Engstrand - NAVAIR, Mr Paul Kulowitch - NAVAIR, Mr Albert Nguyen - NAVAIR, Mr Christopher Martin - JENTEK Sensors Inc
5:00 PM - 5:30 PM
Corrosion Monitoring Using Embedded Sensing Networks in Aircraft Structures Presenter: Dr Giovanni Nino - Quest Integrated Inc Qi2
3:30 PM to 5:00 PM Concurrent Sessions Thursday, April 17, 2014
Structures - Damage Tolerance
Session Chairs: Mr Keith McIver - The Boeing Co (Invited) and Dr Michael Gorelik - FAA
3:30 PM - 4:00 PM
Probabilistic Damage Tolerance for Aircraft Fleets Using an Adaptive Crack Growth Fracture Mechanics Surrogate Model Presenter: Dr Juan Ocampo - University of Texas at San Antonio
4:00 PM - 4:30 PM
Overview of Probabilistic Fatigue And Damage Tolerance Analysis for General Aviation Presenter: Dr Harry Millwater - University of Texas at San Antonio Author: Dr Juan Ocampo - University of Texas at San Antonio
4:30 PM - 5:00 PM
SMARTLD (Small Aircraft Risk Technology Linear Damage) Technology: A Manufacturer's Perspective Presenter: Mr Christopher Hurst - Cessna Aircraft Co Authors: Ms Beth Gamble - Textron Aviation, Mr Perry Saville - Textron Aviation, Mr Christopher Hurst - Textron Aviation
3:30 PM to 5:30 PM Concurrent Sessions Thursday, April 17, 2014
Supply Chain - Supply Chain Risk
3:30 PM - 4:00 PM
So Much Non-Conformance and Too Few Warnings Presenter: Mr William Crowley - QTEC Solutions Inc Author: Mr William Crowley - QTEC Solutions Inc
4:00 PM - 4:30 PM
Conflict Minerals - Identifying and Overcoming Supply Chain Risk Presenter: Mr Scott Wilson - IHS