Introduction to Probabilistic Safe Life Analysis Using the FAA-Sponsored SMART|LD Software Instructor: Dr Harry Millwater - University of Texas at San Antonio Authors: Mr Nathan Crosby - The University of Texas at San Antonio, Dr Juan Ocampo - University of Texas at San Antonio, Ms Beth Gamble - Textron Aviation, Mr Christopher Hurst - Textron Aviation, Mr Marvin Nuss - NuSS Sustainment Solutions
8:00 AM - 10:00 AM
AF Software Training Instructor: Mr Christopher Jackson - USAF
8:00 AM - 12:00 PM
Fundamental Concepts & Methods for Life Prediction Using AFGROW Instructor: Mr James Harter - LexTech Inc
8:00 AM - 12:00 PM
Prognostics & Health Monitoring Instructor: Mr Carl Byington - Impact Technologies
10:00 AM - 12:00 PM
An Overview of USAF Propulsion Airworthiness Instructor: Mr Patrick Ethier - USAF
12:00 PM to 1:00 PM Monday, March 21, 2016
Open Lunch
1:00 PM to 5:00 PM Monday, March 21, 2016
Training II
1:00 PM - 3:00 PM
AF Mil Handbook 516C Instructor: Ms Dawn McGarvey-Buchwalder - USAF Airworthiness Office
Additive Manufacturing Instructor: Mr Dave Pierson - MAGNET
1:00 PM - 5:00 PM
Introduction to Probabilistic Damage Tolerance Analysis Using the FAA-Sponsored SMART|DT Software Instructor: Dr Harry Millwater - University of Texas at San Antonio Authors: Mr Nathan Crosby - The University of Texas at San Antonio, Ms Beth Gamble - Textron Aviation, Mr Christopher Hurst - Textron Aviation, Dr Juan Ocampo - University of Texas at San Antonio
3:00 PM - 5:00 PM
Air Force Non-DOD Military Aircraft Assessments Instructor: Mr Robert FitzHarris - USAF
6:00 PM to 8:00 PM Monday, March 21, 2016
Training III
6:00 PM - 8:00 PM
The 6 Laws of Engineering Leadership Instructor: Dr Vincent Russo - UTC Consultant
Tuesday, March 22, 2016
7:00 AM to 8:00 AM Tuesday, March 22, 2016
Continental Breakfast
7:00 AM to 5:00 PM Tuesday, March 22, 2016
Registration
7:45 AM to 12:15 PM Tuesday, March 22, 2016
General Session
7:45 AM - 7:50 AM
Opening Remarks Awaiting Confirmation
7:50 AM - 9:45 AM
KEYSTONE - Airworthiness (NAC) Moderator: Dr Kenneth Barker - USAF Panel Members: Mr Jorge Gonzalez - USAF Mr Robert Hanley - NAVAIR SYSCOM Mr David Cripps - US Army Aviation & Missile Cmd Mr Joel Ligon - FAA Military Certification Office
9:45 AM to 10:15 AM Tuesday, March 22, 2016
Break
10:15 AM to 12:15 PM Tuesday, March 22, 2016
General Session
10:15 AM - 12:15 PM
KEYSTONE - Airworthiness (ADIAG) Moderator: Ms Dawn McGarvey-Buchwalder - USAF Airworthiness Office Panel Members: Mr Randolph Shields - Textron Aviation Ms Laurette Lahey - The Boeing Co Mr Michael Haerr - Rolls-Royce North America Mr Geoffrey Butler - General Atomics Aeronautical Systems Inc Mr William Mahoney - Northrop Grumman Corp
12:15 PM to 1:30 PM Tuesday, March 22, 2016
Exhibit Hall Luncheon
1:30 PM to 3:00 PM Concurrent Sessions Tuesday, March 22, 2016
The Joint Advanced Materials and Structures (JAMS) Center of Excellence Technical Review Meeting will be Open to AA&S Registrants Hosted By: ( AMTAS ) - The Center of Excellence for Advanced Materials in Transport Aircraft Structures
1:30 PM to 3:00 PM Concurrent Sessions Tuesday, March 22, 2016
Expert Designed - AW in an S&T Environment
1:30 PM - 3:00 PM
AW in an S&T Environment Moderators: Mr Brian Strizak - USAF AFRL/EN and Mr Robert FitzHarris - USAF (Invited) Panel Members: Mr Brian Strizak - USAF AFRL/EN Mr Robert Hanley - NAVAIR SYSCOM Mr David Cripps - US Army Aviation & Missile Cmd CDR Hans Govertsen - Us Coast Guard
1:30 PM to 3:00 PM Concurrent Sessions Tuesday, March 22, 2016
Expert Designed - ESDU
Session Chair: Mr Kevin Hearn - IHS (Invited)
1:30 PM - 1:35 PM
Introduction
1:35 PM - 2:35 PM
76 Years of Validated Safety-Critical Aerospace Methods, Data and Software - An Overview of the IHS ESDU Engineering Service Presenter: Dr John Hammar - IHS
2:35 PM - 3:00 PM
Analysis Methods for Vibrational and Acoustic Fatigue Presenter: Dr John Hammar - IHS
1:30 PM to 3:00 PM Concurrent Sessions Tuesday, March 22, 2016
Structures - Fatigue and Damage Tolerance
Session Chair: Dr John Bakuckas - FAA (Invited)
1:30 PM - 2:00 PM
Analytical Verification of Crack Propagation through Cold Expansion Residual Stress Fields Presenter: Mr Keith Hitchman - Fatigue Technology Authors: Ms Sharon Mellings - CM BEASY, Ms Joy Ransom - Fatigue Technology Inc
2:00 PM - 2:30 PM
Validation of Hole Cold Expansion Modeling and Simulation Presenter: Dr Guillaume Renaud - National Research Council Canada Authors: Mr Yan Bombardier - National Research Council Canada, Dr Gang Li - National Research Council Canada, Dr Min Liao - National Research Council Canada
2:30 PM - 3:00 PM
Modeling Cracks at Pin-loaded Holes in Plates and Lugs: Assumptions, Verification, and Validation Presenter: Dr James Sobotka - SwRI Authors: Mr Joseph Cardinal - SwRI, Dr YiDer Lee - SwRI, Dr Robert McClung - SwRI
3:00 PM to 3:30 PM Tuesday, March 22, 2016
Break
3:30 PM to 5:00 PM Concurrent Sessions Tuesday, March 22, 2016
The Joint Advanced Materials and Structures (JAMS) Center of Excellence Technical Review Meeting will be Open to AA&S Registrants Hosted By: ( AMTAS ) - The Center of Excellence for Advanced Materials in Transport Aircraft Structures
3:30 PM to 5:00 PM Concurrent Sessions Tuesday, March 22, 2016
Expert Designed - ESDU
Session Chair: Mr Kevin Hearn - IHS (Invited)
3:30 PM - 4:05 PM
Aircraft Excrescence Analysis and “Clean-Up” of for Performance Enhancement Presenter: Dr David Philpott - IHS
4:05 PM - 4:40 PM
Assessment of Repair Patches and Patch Design Presenters: Dr David Philpott - IHS Dr John Hammar - IHS
4:40 PM - 5:10 PM
Structural Analysis of Lugs / Bolted Joints Presenter: Dr John Hammar - IHS
5:10 PM - 5:30 PM
Discussion Panel: Issues in Sustaining Aircraft Integrity & Performance
3:30 PM to 5:00 PM Concurrent Sessions Tuesday, March 22, 2016
Expert Designed - No-Fault Found
3:30 PM - 5:00 PM
No-Fault Found Moderator: Mr Ken Anderson - Universal Synaptics Panel Members: Mr Lester Stone - USAF Mr Ken Anderson - Universal Synaptics Mr Bryan Steadman - Total Quality Systems Mr Dana Ellis - National Center of Manufacturing Sciences
3:30 PM to 5:00 PM Concurrent Sessions Tuesday, March 22, 2016
General Airworthiness
Session Chair: Mr Don Roberts - LM Aeronautics
3:30 PM - 4:00 PM
Airworthiness MIL-HDBK-516C and UAS Presenter: Mr Wayne Johnson - Dayton Aerospace Inc
4:00 PM - 5:00 PM
DOD Agreements and Requirements for Contractor Owned/Contractor Operated Air Services Presenter: Ms Lisa Glover - USAF AFLCMCEZSA
5:00 PM - 5:30 PM
ASTM Software Presenter: Dr Stephen Cook - Northrop Grumman
5:30 PM to 7:00 PM Tuesday, March 22, 2016
Networking Reception
Wednesday, March 23, 2016
7:00 AM to 8:00 AM Wednesday, March 23, 2016
Continental Breakfast
7:00 AM to 5:00 PM Wednesday, March 23, 2016
Registration
8:00 AM to 10:30 AM Wednesday, March 23, 2016
General Session
8:00 AM - 8:30 AM
Distinguished Lecturer Presenter: Dr Joseph Beaman - DMDII
8:30 AM - 10:30 AM
KEYSTONE - Additive Manufacturing Moderator: Mr Edward Morris - National Ctr for Defense Mfg & Machining Panel Members: Prof Jack Beuth - Carnegie Mellon University Dr Marilyn Gaska - Lockheed Martin Co Mr Brian Thompson - GKN Aerospace Dr Rollie Dutton - USAF AFRL/RXMS Mr Gregg Wilson - GE Aviation
10:30 AM to 11:00 AM Wednesday, March 23, 2016
Break
11:00 AM to 12:00 PM Concurrent Sessions Wednesday, March 23, 2016
Aviation Safety
Session Chairs: Mr Kevin Stonaker - FAA and Mr Dennis Hannaway - Northrop Grumman Corp (Invited)
11:00 AM - 11:30 AM
Probabilistic Continued Operational Safety Risk Assessment for General Aviation Airplanes Presenter: Mr Christopher Hurst - Textron Aviation Authors: Ms Beth Gamble - Textron Aviation, Mr Perry Saville - Textron Aviation
11:30 AM - 12:00 PM
Method and Device for Hot Air leak Detection in aircraft Installation by Wire Diagnosis Presenter: Mr Laurent Sommervogel - WiN MS Authors: Mr Marc Olivas - WiN MS, Ms Soumaya Sallem - WiN MS
11:00 AM to 12:00 PM Concurrent Sessions Wednesday, March 23, 2016
Digital Thread and Digital Twin - Part I
Session Chair: Ms Angie Tymofichuk - Logistic Specialties Inc
11:00 AM - 11:30 AM
The Airframe Digital Twin Spiral 1 Program Presenter: Dr Eric Tuegel - USAF AFRL Authors: Mr Douglas Henderson - USAF, Dr Pamela Kobryn - USAF AFRL/RQVS
11:30 AM - 12:00 PM
The P's in P2IAT - Achieving Airframe Digital Twin's Vision for IAT Presenter: Dr Liping Wang - GE Authors: Dr Isaac Asher - GE, Dr Dale Ball - Lockheed Martin Co, Mr Elias Dakwar - Lockheed Martin Co, Dr Jochen Hoffman - Wyle, Dr Genghis Khan - General Electric Global Research, Mr Chenzhao Li - Vanderbilt University, Dr You Ling - GE, Dr Sankaran Mahadevan - Vanderbilt University, Mr Robert Shannon - Lockheed Martin Co, Dr Felipe Viana - GE
11:00 AM to 12:00 PM Concurrent Sessions Wednesday, March 23, 2016
Expert Designed - Additive Manufacturing "The AF Perspective on Add Mfg-Challenges, Opportunities and the Way Forward"
Session Chair: Dr Rollie Dutton - USAF AFRL/RXM
11:00 AM - 12:00 PM
The Air Force Perspective on Additive Manufacturing – Challenges, Opportunities and the Way Forward Presenter: Dr Lawrence Butkus - USAF AFRL Author: Dr Jonathan Miller - USAF AFRL
11:00 AM to 12:00 PM Concurrent Sessions Wednesday, March 23, 2016
The Joint Advanced Materials and Structures (JAMS) Center of Excellence Technical Review Meeting will be Open to AA&S Registrants Hosted By: ( AMTAS ) - The Center of Excellence for Advanced Materials in Transport Aircraft Structures
1:30 PM to 3:00 PM Concurrent Sessions Wednesday, March 23, 2016
Digital Thread and Digital Twin - Part 2
Session Chairs: Dr Eric Tuegel - USAF AFRL and Dr Marilyn Gaska - Lockheed Martin Co
1:30 PM - 2:00 PM
Developing the Airframe Digital Twin Prognostic & Probabilistic Individual Aircraft Tracking Paradigm Presenter: Dr Elias Anagnostou - Northrop Grumman Corp Authors: Mrs Karin Engel - Northrop Grumman Corp, Mr Stephen Engel - Northrop Grumman Corp, Dr David Hoitsma - Northrop Grumman Corp, Mr John Madsen - Northrop Grumman Corp, Mr Jerrell Nardiello - Northrop Grumman Corp, Mr Nathan Crosby - The University of Texas at San Antonio, Dr Harry Millwater - University of Texas at San Antonio, Dr Juan Ocampo - University of Texas at San Antonio, Mrs Carolina Quintana - University of Texas at San Antonio
2:00 PM - 2:30 PM
Digital Thread for Material Review Board Presenter: Mr John Crawford - Northrop Grumman Corp Authors: Mr John Crawford - Northrop Grumman Corp, Dr Elias Anagnostou - Northrop Grumman Corp, Mr Stephen Engel - Northrop Grumman Corp, Mr Uriah Liggett - Etegent Technologies, Mr John Madsen - Northrop Grumman Corp, Mr Richard Meyers - USAF AFRL/RXM, Dr Thomas Sharp - Etegent Technologies, Mr Chuen Yau - Northrop Grumman Corp, Mr Jeffry Genge - Northrop Grumman Corp
2:30 PM - 3:00 PM
A Digital Thread Infrastructure for the Material Review Board Process Presenter: Mr Harlan Shober - RJ Lee Group
1:30 PM to 3:00 PM Concurrent Sessions Wednesday, March 23, 2016
Expert Designed - Additive Manufacturing Standards and Specs Development Status
1:30 PM - 3:00 PM
PANEL: Additive Manufacturing Standards and Specs Development Status Moderators: Dr Michael Gorelik - FAA and Mr Edward Morris - National Ctr for Defense Mfg & Machining Panel Members: Mr Kevin Jurrens - National Institute of Standards & Technology Mr Brian Thompson - GKN Aerospace Dr Michael Gorelik - FAA
1:30 PM to 3:00 PM Concurrent Sessions Wednesday, March 23, 2016
Structures - Large Scale Test
Session Chair: Dr Lawrence Butkus - USAF AFRL/RX
1:30 PM - 2:00 PM
Damage Growth of Sandwich Structures under Ground-Air-Ground Cycles Presenter: Dr Waruna Seneviratne - Wichita State University NIAR Authors: Mr Caleb Saathoff - NIARWSU, Dr Waruna Seneviratne - Wichita State University NIAR
2:00 PM - 2:30 PM
Evaluation of Adhesively Bonded Repairs to Fuselage Structure Subjected to Environmental Conditions Presenter: Mr Ryan Neel - Drexel University Authors: Dr Jonathan Awerbuch - Drexel University, Dr John Bakuckas - FAA, Mr Bin Lei - Drexel University, Mr Ryan Neel - Drexel University, Dr Tein Min Tan - Drexel University, Mr Yongzhe Tian - FAA Technical Ctr, Mr Mark Freisthler - FAA, Ms Kelly Greene - BRT Structures Technologies Sustainment, Mr Ian Won - FAA, Mr Justin Kearns - Boeing Research & Technology
2:30 PM - 3:00 PM
In Situ Thermoelastic Stress Analysis of the F-35 - An Improved Approach to Airframe Structural Model Validation Presenter: Mr Marcus McDonald - Defence Science & Technology Group Australia Authors: Dr Nik Rajic - Defence Science & Technology Group, Mr Donald Whiteley - Lockheed Martin Co, Mr David McSwiggen - Lockheed Martin Co
1:30 PM to 3:00 PM Concurrent Sessions Wednesday, March 23, 2016
Vehicle Integrated Propulsion (VIPR) Environmental FOD Testing II
Session Chairs: Ms Grizelda Loy-Kraft - USAF AFRL and Mr Gregory Follen - NASA GRC and Mr Joel Sitz - NASA
1:30 PM - 2:00 PM
VIPR/VAE Results Presenters: Ms Grizelda Loy-Kraft - USAF AFRL Mr Michael Venti - NASA
The Joint Advanced Materials and Structures (JAMS) Center of Excellence Technical Review Meeting will be Open to AA&S Registrants Hosted By: ( AMTAS ) - The Center of Excellence for Advanced Materials in Transport Aircraft Structures
3:30 PM to 5:30 PM Concurrent Sessions Wednesday, March 23, 2016
Corrosion
Session Chairs: Mr David Cripps - US Army Aviation & Missile Cmd (Invited) and Mr Robert Tipton - Wyle
3:30 PM - 4:00 PM
MQ-8 Fire Scout Corrosion Prevention and Control Presenter: Mr Philip Grudier - NAVAIR
4:00 PM - 4:30 PM
Improved Life Cycle Management of Corroded Structures Presenter: Dr Robert Tryon - VEXTEC
4:30 PM - 5:00 PM
Dehumidification on Aircraft Presenter: Mr James Valky - Sesame Technologies LogisTech Author: Mr James Valky - Sesame Technologies LogisTech
3:30 PM to 5:30 PM Concurrent Sessions Wednesday, March 23, 2016
Enhanced NDE for Improved Aircraft Sustainment
Session Chairs: Mr Daniel Perey - NASA LaRC and Dr Gary Georgeson - The Boeing Co
3:30 PM - 4:00 PM
EVI – Eddy Current Developments Opening the Door to Advanced Sustainment Practices Presenter: Mr Charles Buynak - USAF AFRL/RX Author: Mr George Nuxoll - UniWest
4:00 PM - 4:30 PM
Assessment of Bolthole NDE Inversion Capabilities Presenter: Mr David Forsyth - TRI/Austin
4:30 PM - 5:00 PM
Damage State Awareness: Quantitative Structural Damage Characterization Presenter: Dr Eric Lindgren - USAF AFRL
5:00 PM - 5:30 PM
Advanced Sustainment Knowledge through NDE Presenter: Mr Joshua Shearer - USAF AFRL/RXCA Author: Mr Joshua Shearer - USAF AFRL/RXCA
3:30 PM to 5:30 PM Concurrent Sessions Wednesday, March 23, 2016
AS6081 Procurement: A Guide to Utilizing the Open Market in Order to Reduce Cost, Increase Readiness, Reduce Liability and comply with DFARS by Procuring Obsolete/Unavailable Material Thru Certified Distributors. Presenter: Ms Christine Lutheran - Secure Components
4:00 PM - 4:30 PM
Long Term Viper: Flying the F-16 to 8000 Hours and Beyond! Presenter: Dr Kimberli Jones - USAF Authors: Mr Bryce Harris - USAF, Mr Scott May - Lockheed Martin Co, Mr Matthew Regan - USAF, Mr Austin Rickards - USAF, Mr Kevin Welch - Lockheed Martin Co
4:30 PM - 5:00 PM
Obsolescence!!! Now What? Presenter: Mr Thomas Sanneman - BAE Systems
3:30 PM to 5:00 PM Concurrent Sessions Wednesday, March 23, 2016
Vehicle Integrated Propulsion (VIPR) Environmental FOD Testing III
Session Chairs: Ms Grizelda Loy-Kraft - USAF AFRL and Mr Gregory Follen - NASA GRC (Invited) and Mr Joel Sitz - NASA
3:30 PM - 3:50 PM
NASA COBRA Presenter: Mr Mark Woike - NASA
3:50 PM - 4:10 PM
NASA EP-FOD Presenter: Mr Michael Venti - NASA
4:10 PM - 5:00 PM
Next Steps - Discussion Led by Session Chairs
Thursday, March 24, 2016
7:00 AM to 8:00 AM Thursday, March 24, 2016
Continental Breakfast
7:00 AM to 5:00 PM Thursday, March 24, 2016
Registration
7:30 AM to 9:30 AM Thursday, March 24, 2016
General Session
7:30 AM - 9:30 AM
KEYSTONE PANEL- Sustainment Technology Moderator: Dr Vincent Russo - UTC Consultant Panel Members: Mr Thomas Lockhart - USAF AFRL/RX Mr Kevin Stamey - USAF Dr John La Scala - US Army Mr James Rollen - Boeing Co Mr Thomas Owen - Lockheed Martin
9:30 AM to 10:00 AM Thursday, March 24, 2016
Break
10:00 AM to 11:30 AM Concurrent Sessions Thursday, March 24, 2016
Additive Manufacturing
Session Chair: Mr Scott Gray - Elevate Systems
10:00 AM - 10:30 AM
Additive Manufacturing for AV-8B Engine Repair at FRC East Presenter: Mr Stephen Brown - ARL Penn State Author: Mr Stephen Brown - ARL Penn State
10:30 AM - 11:00 AM
America Makes Additive Manufacturing for Maintenance and Sustainment Advisory Group: Collaboration Opportunities Presenter: Dr Marilyn Gaska - Lockheed Martin Co
11:00 AM - 11:30 AM
Overview of SAE AMS-AM Presenter: Mr J Hector Sandoval - Lockheed Martin
10:00 AM to 11:30 AM Concurrent Sessions Thursday, March 24, 2016
Air Force Sustainment Requirements and Strategy
Session Chairs: Mr Richard Gibson - USAF and Ms Debora Naguy - USAF
10:00 AM - 10:30 AM
AF Sustainment Requirement and Strategy Presenter: Mr Richard Gibson - USAF
10:30 AM - 11:00 AM
AFLCMC Strategy and Programming Presenter: Ms Debora Naguy - AFLCMC
11:00 AM - 11:30 AM
AF Sustainment Center Presenter: Mr Edward Ayer - USAF
10:00 AM to 11:30 AM Concurrent Sessions Thursday, March 24, 2016
Expert Designed - Aerospace Standards SAE
10:00 AM - 11:30 AM
New SAE Standards Efforts Moderator: Mr James Sherman - SAE International Panel Members: Mr James Sherman - SAE International Mr John Evers - SAE International Mr Bruce Mahone - SAE International
10:00 AM to 11:30 AM Concurrent Sessions Thursday, March 24, 2016
NDE - In Service
Session Chairs: Dr Eric Lindgren - USAF AFRL and Mr Elliott Cramer - NASA LaRC
10:00 AM - 10:30 AM
Integration of Simulated NDE POD Curves with Structural Reliability Assessments Presenter: Dr Joseph Gray - NDE Technologies
10:30 AM - 11:00 AM
An Innovative Unit-cell Approach for Quantification of Damage with Known Locations using Acousto-Ultrasound-based SHM Technique Presenter: Dr Susheel Yadav - Acellent Technologies Inc
11:00 AM - 11:30 AM
Reliable Detection of Small Cracks Induced During Service for Fatigue Critical Components Presenter: Dr Neil Goldfine - JENTEK Sensors Inc Authors: Mr Stuart Chaplan - JENTEK Sensors Inc, Mr David Grundy - JENTEK Sensors Inc, Dr Yanko Sheiretov - JENTEK Sensors Inc, Dr Zachary Thomas - JENTEK Sensors Inc, Dr Mark Windoloski - JENTEK Sensors Inc
11:30 AM to 1:00 PM Thursday, March 24, 2016
Lunch
12:15 PM - 1:00 PM
Lunch Presentation Luncheon Speaker: Mr Michael Quiello - United Airlines
1:00 PM to 3:00 PM Concurrent Sessions Thursday, March 24, 2016
Air Force Sustainment Technical Programs
Session Chairs: Mr Stephan Wolanczyk - USAF AFRL (Invited) and Dr Marilyn Gaska - Lockheed Martin Co
1:00 PM - 1:30 PM
AF Sustainment Technology Transition Intro Presenter: Mr Gary Steffes - USAF AFRL
1:30 PM - 2:00 PM
Software: Application Arenas Beyond Traditional Sustainment Presenter: Mr Michael McLendon - Carnegie Mellon University
2:00 PM - 2:30 PM
Effectively Using Digital Information and Tools to Revolutionize Maintenance and Sustainment Presenter: Mr Gary Steffes - USAF AFRL
2:30 PM - 3:00 PM
Humans: Maintainer Training Tools, Effectiveness Presenter: Ms Chantale Wilson - USAF AFRL
1:00 PM to 3:00 PM Concurrent Sessions Thursday, March 24, 2016
Expert Designed - Use of S&T in Managing the Australian Defence Force Fleet
Session Chairs: Mr Richard Gauntlett - AA&S Australia and Mr Robert Tipton - Wyle
1:00 PM - 1:30 PM
Lessons Learned from Sustaining the RAAF Legacy Hornet Fleet Applied to the Super Hornet Fleet Presenter: SQN LDR Richard Kloeden - Defence Science & Technology Group
1:30 PM - 2:00 PM
Hornet Outer Wing StAtic Testing (HOWSAT) Program for RAAF Classic Hornet Service Life Management Presenter: Mr Wayne Foster - Defence Science and Technology Group Authors: Dr Simon Barter - Defence Science & Technology Group, SQNLDR Matthew Gordon - Royal Australian Air Force, WGCDR Benjamin Main - Royal Australian Air Force RAAF, Dr Loris Molent - Defence Science & Technology Group, FLTLT Liam Weibler - RAAF, Mr Wayne Foster - Defence Science and Technology Group
2:00 PM - 2:30 PM
Advancing Rotorcraft Airframe Fatigue Testing Presenter: Dr John Vine - Defence Science & Technology Group Authors: Mr Robert Boykett - Defence Science Technology Organization, Miss Crystal Forrester - Defence Science & Technology Group, Mr Luther Krake - Defence Science and Technology Group, Mr Beau Krieg - Defence Science & Technology Group, Mr Quang Nguyen - Defence Science & Technology Group, Mr Jason Underwood - Advanced VTOL Technologies, Dr John Vine - Defence Science & Technology Group, Dr Kevin Walker - Defence Science & Technology Group
2:30 PM - 3:00 PM
Repair of critical airframe components using rework shape optimisation: Overview of recent applications Presenter: Dr Manfred Heller - Defence Science & Technology Organization Authors: Dr Manfred Heller - Defence Science & Technology Group, Dr Ron Wescott - Defence Science & Technology Group Retired, Dr Xiaobo Yu - Defence Science & Technology Group
1:00 PM to 3:00 PM Concurrent Sessions Thursday, March 24, 2016
Probabilistic Fatigue and Damage Tolerance
Session Chairs: Mr Curtis Davies - FAA and Mr Daniel Gardner - Northrop Grumman Corp
1:00 PM - 1:30 PM
Using SMART|DT to Ensure the Continued Structural Safety of Textron Aviation's Fleet Presenter: Ms Beth Gamble - Textron Aviation
1:30 PM - 2:00 PM
Recursive Probability Integration and Effect of Inspection Correlations of In Situ Nondestructive Inspections on Risk Prediction for Aircraft Fatigue Management Presenter: Dr Michael Shiao - US Army Research Lab Author: Dr Tzikang Chen - Army Research Lab
2:00 PM - 2:30 PM
Efficient Methods for Probabilistic Damage Tolerance Analysis of Aircraft Structures Presenter: Dr Juan Ocampo - University of Texas at San Antonio Author: Dr Harry Millwater - University of Texas at San Antonio
1:00 PM to 3:00 PM Concurrent Sessions Thursday, March 24, 2016
Structures - Metal Behavior
Session Chair: Mr Kevin Stonaker - FAA
1:00 PM - 1:30 PM
Evaluation of CAD versus ZnNi Coated Bushings installed in 7050-T7451 Aluminum Structure Presenter: Ms Joy Ransom - Fatigue Technology Inc
1:30 PM - 2:00 PM
Expansion of Allowable Dent Limits for the C-5 Galaxy’s Aluminum Honeycomb Panels Presenter: Dr Stefan Delin - Alion Science & Technology Authors: Mr John Bishop - Alion Science & Technology, Mr Jignesh Patel - Alion Science & Technology, Mr Paul Varughese - Alion Science & Technology
2:00 PM - 2:30 PM
Reconstruction of Fatigue Crack Growth in Aluminum Alloy Fastened Lap Joints Using Marker Band Analysis Presenter: Mr David Stanley - Drexel University
2:30 PM - 3:00 PM
Assessment of Emerging Metallic Structures Technologies Through Full-Scale Test and Analysis of Fuselage Panels Presenter: Dr John Bakuckas - FAA
1:30 PM to 3:00 PM Concurrent Sessions Thursday, March 24, 2016
Digital Thread Training
1:30 PM - 3:00 PM
Digital Thread Training Instructor: Dr Barry Smith - Barry Smith Research
3:00 PM to 3:30 PM Thursday, March 24, 2016
Break
3:30 PM to 5:00 PM Concurrent Sessions Thursday, March 24, 2016
Condition-Based Maintenance/IVHM
Session Chair: Mr Christopher Pomfret - Treble One LLC
3:30 PM - 4:00 PM
RFID Based Sensors Activated by Composite Structural Damage Presenter: Mr Robert Kauffman - University of Dayton Research Institute
4:00 PM - 4:30 PM
Machine Learning Techniques for iVHM Self-Diagnostics Presenter: Dr Thomas Melia - CurtissWright Author: Mr Alan Cooke - CurtissWright
4:30 PM - 5:00 PM
A Real-time State-awareness and Self-Diagnostic System for Fly-by-feel Intelligent Aerial Vehicles Presenter: Dr FuKuo Chang - Stanford University
3:30 PM to 5:00 PM Concurrent Sessions Thursday, March 24, 2016
NDE of Composites
Session Chairs: Ms Lisa Brasche - Pratt & Whitney (Invited) and Dr William Winfree - NASA LaRC
3:30 PM - 4:00 PM
Composite Characterization using Ultrasonic Wavefield Techniques Presenter: Dr Cara Leckey - NASA LaRC Authors: Mr Peter Juarez - NASA LaRC, Mr Jeffrey Seebo - Lockheed Martin Co
Damage Analysis of Ultrasonic Phased Array Data from Large Scale PRSEUS Composite Test Article During Load Testing and After Catastrophic Failure Presenter: Mr Peter Juarez - NASA LaRC Authors: Dr Patrick Johnston - NASA LaRC, Mr Peter Juarez - NASA LaRC, Mr Jeffrey Seebo - Lockheed Martin Co
3:30 PM to 5:00 PM Concurrent Sessions Thursday, March 24, 2016
Repair
Session Chairs: Mr David Rycroft - Lockheed Martin Co and Mr Pieter van Dijk - Civil Aviation Safety Authority
3:30 PM - 4:00 PM
Portable Peening Solution for Fatigue Life Extension Programs and Repairs Presenter: Ms Kelly McClurg - Avion Solutions Inc Authors: Mr Paul Harnitz - Avion Solutions Inc, Mr Julien Jeanneau - Empowering Technologies
4:00 PM - 4:30 PM
IDS - A Systems Approach to Fault Detection / Fault Isolation Presenter: Mr Robert Silva - Lockheed Martin Co Author: Mr Ed Bestle - Lockheed Martin Co
4:30 PM - 5:00 PM
Improving Aircraft Availability with Alternative Sealants Presenter: Mr Chris Mardis - W L Gore Associates Inc
3:30 PM to 5:00 PM Concurrent Sessions Thursday, March 24, 2016
System Challenges
Session Chair: Mr Nicholas Eckstein - Boeing
3:30 PM - 4:00 PM
Drag Reduction Study for the HH-60G Pave Hawk Helicopter Presenter: Dr Emily Childress - Mercer Engineering Research Ctr
4:00 PM - 4:30 PM
Recent Korean UAVs Development Projects and Lessons Learned Presenter: Lt Sehoon Cha - Defense Acquisition Program Agency Korea Author: Ms Yeonkyeong Oh - KOREAN AIR