Aircraft Structural Integrity Program Header
Monday, November 30, 2015
1:00 PM to 5:00 PM 
Monday, November 30, 2015
  TRAINING: Design of the Full Strength, Damage Tolerant Repairs for Metallic Aircraft Structure: The Art Behind the Science
1:00 PM - 5:00 PM
TRAINING: Design of the Full Strength, Damage Tolerant Repairs for Metallic Aircraft Structure: The Art Behind the Science
Instructors:
Mr Scott Carlson -
SwRI

Ms Rachel Heller -
SwRI

Tuesday, December 1, 2015
7:00 AM to 8:00 AM 
Tuesday, December 1, 2015
  Registration/Continental Breakfast

8:00 AM to 9:15 AM 
Tuesday, December 1, 2015
  Welcome/Lincoln Presentation & Award
How the C-5A Forced Lincoln, Tiffany and the Air Force to Confront Widespread Fatigue Damage Early
No Speaker: Mr Ed Ingram - Lockheed Martin Co

9:15 AM to 9:45 AM 
Tuesday, December 1, 2015
  Break

9:45 AM to 11:45 AM 
Tuesday, December 1, 2015
  Session 1: Overviews I
Session Chair: Dr Ravinder Chona - USAF AFRL
9:45 AM - 10:15 AM
Damage Tolerance for Life Management of Composite Structures - Part 1: Modeling
Presenter: Dr David Mollenhauer - USAF AFRL

Author: Mr Mark Flores - University of Texas El Paso
10:15 AM - 10:45 AM
Damage Tolerance for Life Management of Composite Structures - Part 2: Nondestructive Evaluation
Presenter: Dr Eric Lindgren - USAF AFRL

Authors: Dr David Mollenhauer - USAF AFRL/RXCC, Capt Sarah Wallentine - USAF AFRL, Mr John Welter - USAF AFRL/RXCA
10:45 AM - 11:15 AM
ADS-89-SP: A Standard Practice for U.S. Army Rotorcraft Structural Integrity Programs
Presenter: Dr Robert Benton - US Army Aviation Engineering Directorate

Authors: Mr Nathaniel Bordick - AATD, Dr Mark Robeson - AATD
11:15 AM - 11:45 AM
Digital Thread/Digital Twin Benefits Assessment
Presenter: Mr Joseph Lougheed - Lockheed Martin Co

Author: Mr Joseph Lougheed - Lockheed Martin Co
11:45 AM to 1:30 PM 
Tuesday, December 1, 2015
  Group Luncheon
12:00 PM - 12:30 PM

Luncheon Speaker: Dr Michael Gorelik - FAA

1:30 PM to 3:00 PM 
Tuesday, December 1, 2015
  Session 2: Prognostics & Risk Analysis I
Session Chair: Dr Eric Tuegel - USAF AFRL
1:30 PM - 2:00 PM
Risk Assessments per DoD System Safety, USAF Airworthiness and USAF ASIP
Presenter: Mr Charles Babish - USAF Life Cycle Management Center

2:00 PM - 2:30 PM
Risk-Shaping the Building Block Development Process for Certification of Composite Structure
Presenter: Mr LeRoy Fitzwater - The Boeing Co

Authors: Mr Richard Holzwarth - USAF AFRL, Dr Michael Renieri - The Boeing Co, Dr Herb Smith - Boeing Aircraft
2:30 PM - 3:00 PM
Aircraft Structural Reliability under the Cumulative Effect of Structural Repairs
Presenter: Dr Mohammad Khalessi - PredictionProbe Inc

3:00 PM to 3:30 PM 
Tuesday, December 1, 2015
  Break

3:30 PM to 5:00 PM 
Tuesday, December 1, 2015
  Session 3: Characterization, Modeling & Testing I
Session Chair: Mr Jeffrey McFarland - The Boeing Co
3:30 PM - 4:00 PM
Comparing Starting Crack Size Estimates (EPS and EIFS) Based on the Same Experimental Crack Growth Life Data
Presenter: Dr Joseph Gallagher - Consultant

Author: Dr Loris Molent - Defence Science & Technology Group
4:00 PM - 4:30 PM
Effective Corrosion Prevention Control Plans
Presenter: Mr Terry Gabbert - USAF AFRL

4:30 PM - 5:00 PM
Towards the Virtual Fatigue Test: A Hybrid Experimental/Numerical Approach
Presenter: Dr Albert Wong - Australian Defence Science & Technology Organization

5:00 PM to 7:00 PM 
Tuesday, December 1, 2015
  Poster Session
5:00 PM - 7:00 PM
Growth of Cracks from Small Naturally Occurring Material Discontinuities Under a Minitwist Spectrum
Poster Presenter: Miss Dinaz Tamboli - Monash University

Authors: Dr Simon Barter - Defence Science & Technology Group, Prof Rhys Jones - Monash University
5:00 PM - 7:00 PM
Relationship between Galvanic Corrosion and Local Plastic Deformation - A7050-T7451
Poster Presenter: Dr Alberto Mello - Purdue University

Authors: Miss Andrea Nicolas - Purdue University, Dr Michael Sangid - Purdue University
5:00 PM - 7:00 PM
Implementation Challenges for Small Fleet Structural Monitoring
Poster Presenters:
Dr Thomas Melia -
CurtissWright

Mr Scott English -
Curtiss-Wright Controls Avionics & Electronics

5:00 PM - 7:00 PM
Localized Peening Technology for On-Aircraft Repairs
Poster Presenter: Ms Kelly McClurg - Avion Solutions Inc

5:00 PM to 7:00 PM 
Tuesday, December 1, 2015
  Reception

Wednesday, December 2, 2015
7:00 AM to 8:00 AM 
Wednesday, December 2, 2015
  Registration/Continental Breakfast

8:00 AM to 9:30 AM 
Wednesday, December 2, 2015
  Session 4: Overviews II
Session Chair: Dr Lawrence Butkus - USAF AFRL/RX
8:00 AM - 8:30 AM
Three Transport Aircraft ASIP Case Studies - The Australian Perspective
Presenter: Mr Ross Stewart - QinetiQ

Authors: SQNLDR Laine Pearce - RAAF, Mr Ross Stewart - QinetiQ
8:30 AM - 9:00 AM
B-1 Wing FSFT Progress and Lower Skin Trailing Edge DaDT Analysis
Presenter: Mr Kwok Lee - The Boeing Co

Authors: Mr Isaac Meier - Boeing, Mr John Kowalczyk - Boeing, Mr Ryan Rowten - USAF, Mr Rodney Harberson - USAF
9:00 AM - 9:30 AM
T-38 Wing Teardowns - Making a Molehill out of a Mountain
Presenter: Dr Paul Clark - SwRI

Authors: Dr Michael Blinn - USAF, Dr James Greer - HQ USAFA/DFEM, Mr Isaac Grothe - SwRI
9:30 AM to 10:00 AM 
Wednesday, December 2, 2015
  Break

10:00 AM to 12:00 PM 
Wednesday, December 2, 2015
  Session 5: Life Enhancement/Repair/Replacement Concepts
Session Chair: Mr Scott Carlson - Southwest Research Institute
10:00 AM - 10:30 AM
Fatigue Enhancement of a Critical A-10 Structural Detail Using Engineered Residual Stress
Presenter: Dr Michael Hill - Hill Engineering LLC

Authors: Mr Timothy Allred - AFLCMCWWAEJ, Dr Adrian DeWald - Hill Engineering LLC, Ms Stephanie Flanagan - USAF AFRL, Mr Robert Pilarczyk - USAF, Dr Mark Thomsen - USAF, Mr John VanDalen - Hill Engineering LLC
10:30 AM - 11:00 AM
The Durability Assessment of a Short Edge Distance Cold Expanded Fastener Hole in a Fracture Critical F/A-18 Wing Attachment Bulkhead
Presenter: Dr Simon Barter - Australian Defence Science & Technology Organization

Authors: Mr David Russell - Defence Science & Technology Organization, Dr Xiaobo Yu - Defence Science & Technology Group
11:00 AM - 11:30 AM
Finite Element Analysis of Bonded Repairs and Analysis Methods for the ASIP Engineer
Presenter: Mr Lawrence Stoker - USAF

Authors: Mr Scott Carlson - Southwest Research Institute, Mr Lawrence Stoker - USAF
11:30 AM - 12:00 PM
B-1 Wing Repair - Unique Hole Geometry Cold Expansion Solutions
Presenter: Mr Dean Madden - Fatigue Technology

12:00 PM to 1:45 PM 
Wednesday, December 2, 2015
  Group Luncheon
12:00 PM - 12:30 PM

Luncheon Speaker: Mr Thomas Lockhart - USAF AFRL/RX

1:45 PM to 3:15 PM 
Wednesday, December 2, 2015
  Session 6: Characterization, Modeling & Testing II
Session Chair: Mr Kevin Welch - Lockheed Martin Co
1:45 PM - 2:15 PM
In Situ Thermoelastic Stress Analysis of the F-35 - An Improved Approach to Airframe Structural Model Validation
Presenter: Mr Marcus McDonald - Australian Defence Science & Technology Organization

Authors: Mr Marcus McDonald - Defence Science & Technology Group Australia, Mr David McSwiggen - Lockheed Martin Co, Dr Nik Rajic - Defence Science & Technology Group, Mr Donald Whiteley - Lockheed Martin Co
2:15 PM - 2:45 PM
Determination of Vibratory Loads for the HH-60G Pave Hawk Helicopter
Presenter: Dr Robert McGinty - Mercer Engineering Research Ctr

2:45 PM - 3:15 PM
Process Induced Bulk Residual Stress Finite-Element Model and Validation Measurements of an Aluminum Alloy Forged and Machined Bulkhead
Presenter: Dr John Watton - Alcoa Technical Ctr

Authors: Dr Mark James - Alcoa Technical Ctr, Dr Adrian DeWald - Hill Engineering LLC, Dr Dale Ball - Lockheed Martin Co, Mr Don Dubowski - Lockheed Martin Co
3:15 PM to 3:45 PM 
Wednesday, December 2, 2015
  Break

3:45 PM to 5:15 PM 
Wednesday, December 2, 2015
  Session 7: Overviews III
Session Chair: Mr Marinus Bos - National Aerospace Laboratory NLR
3:45 PM - 4:15 PM
Hornet Outer Wing StAtic Testing (HOWSAT) Program for RAAF Classic Hornet Service Life Management
Presenter: WGCDR Benjamin Main - Royal Australian Air Force RAAF

Authors: Dr Simon Barter - Defence Science & Technology Group, Mr Wayne Foster - Defence Science and Technology Group, SQNLDR Matthew Gordon - Royal Australian Air Force, Dr Loris Molent - Defence Science & Technology Group, FLTLT Liam Weibler - RAAF
4:15 PM - 4:45 PM
C-130 Full Scale Wing Durability Test with an ESL Wing: Coupon Test Program
Presenter: Dr Albert Arrieta - Lockheed Martin Co

4:45 PM - 5:15 PM
Long Term Viper: Flying the F-16 to 8000 Hours and Beyond!
Presenter: Dr Kimberli Jones - USAF F-16 ASIP

Authors: Mr Bryce Harris - USAF, Mr Scott May - Lockheed Martin Co, Mr Matthew Regan - USAF, Mr Austin Rickards - USAF, Mr Kevin Welch - Lockheed Martin Co
Thursday, December 3, 2015
7:00 AM to 8:00 AM 
Thursday, December 3, 2015
  Registration/Continental Breakfast

8:00 AM to 9:30 AM 
Thursday, December 3, 2015
  Session 8: Overviews IV
Session Chair: Mr Robert Norcross - USAF HQ ACC
8:00 AM - 8:30 AM
B-52 Inboard Wing Teardown
Presenter: Ms Jennifer Wilson - The Boeing Co

8:30 AM - 9:00 AM
F-16 Block 50 Full Scale Durability Test - Leveraging the Data
Presenter: Mr Keith Sundstrom - Lockheed Martin Co

9:00 AM - 9:30 AM
Service Life Extension Program of the Aging Fighter Bomber Aircrafts
Presenter: Mr Marcin Kurdelski - Air Force Institute of Technology Poland

9:30 AM to 10:00 AM 
Thursday, December 3, 2015
  Break

10:00 AM to 11:30 AM 
Thursday, December 3, 2015
  Session 9: Nondestructive Inspection/Evaluation & Structural Health Monitoring
Session Chair: Mr John Brausch - USAF AFRL
10:00 AM - 10:30 AM
Using Data Analysis Techniques For Assessing New Nondestructive Inspection (NDI) Systems
Presenter: Mr Gary Steffes - USAF AFRL

10:30 AM - 11:00 AM
Structural Health Monitoring, Risk, and Reliability
Presenter: Mr David Forsyth - TRI/Austin
11:00 AM - 11:30 AM
Improving NDI Confidence
Presenter: Mr Jacob Warner - USAF F-22 ASIP

11:30 AM to 1:30 PM 
Thursday, December 3, 2015
  Open Lunch

1:30 PM to 3:00 PM 
Thursday, December 3, 2015
  Session 10: Prognostics & Risk Analysis II
Session Chair: Mr Michael Bouchard - UDRI
1:30 PM - 2:00 PM
Probabilistic Damage Tolerance using the FAA-Sponsored SMART|DT Software
Presenter: Dr Harry Millwater - University of Texas at San Antonio

Authors: Mr Nathan Crosby - The University of Texas at San Antonio, Ms Beth Gamble - Textron Aviation, Mr Christopher Hurst - Textron Aviation, Mr Marvin Nuss - NuSS Sustainment Solutions, Dr Juan Ocampo - University of Texas at San Antonio
2:00 PM - 2:30 PM
HH-60G Risk-Based Service Life Assessment
Presenter: Dr Nathan Branch - Mercer Engineering Research Ctr

Authors: Dr Thomas Brussat - Tom Brussat Engineering LLC, Mr Gregory Wood - Mercer Engineering & Research Ctr
2:30 PM - 3:00 PM
Probabilistic Risk Assessment - The SMART Approach To Continued Operational Safety
Presenter: Ms Beth Gamble - Textron Aviation

3:00 PM to 3:30 PM 
Thursday, December 3, 2015
  Break

3:30 PM to 5:00 PM 
Thursday, December 3, 2015
  Session 11: Characterization, Modeling & Testing III
Session Chair: Dr Robert James - Northrop Grumman Corp
3:30 PM - 4:00 PM
Residual Stress Measurement using X-Ray Diffraction and Slitting Methods to Assess Significant Stress Corrosion Cracking in Extruded 7075-T651 Wing Skin Integral Risers on Australian Air Force P-3C Aircraft
Presenter: Dr Kevin Walker - Defence Science Technology Organization

Authors: Dr Adrian DeWald - Hill Engineering LLC, SQNLDR Justin Hill - DGTA-ADF, Dr Michael Hill - Hill Engineering LLC
4:00 PM - 4:30 PM
Flight Maneuver Recognition for the UH-1N Helicopter
Presenter: Dr Nathan Branch - Mercer Engineering Research Ctr

Authors: Mr James Bozarth - Mercer Engineering Research Ctr, Mr Nicholas Hatcher - Mercer Engineering Research Ctr, Dr Nathan Branch - Mercer Engineering Research Ctr, Dr Joshua Finn - Mercer Engineering Research Ctr
4:30 PM - 5:00 PM
Impacts on Crack Growth Analysis of Titanium 6Al-4V Small Crack Test Data
Presenter: Dr Ji Park - Lockheed Martin Co

Authors: Mr Wirt Garcia - USAF, Mr Jacob Warner - USAF
X CLOSE WINDOW